When I am using CCDap3 and the PIR Rotator begins to rotate to the desired position, I alwasy get the window warning me "TheSky has rotated" "Rotate PIR to new TheSky Rotation" or "Cancel TheSky Rotation"

Do I just leave it alone, or is there something I can do about it?

Thank you,

Norm

PIR_Message.doc (702 KB, 68 downloads) Word Document

Hi Norm,

Do not connect the TCC application to TheSky when using CCDAP. They will conflict. "No rotator can serve two masters". <g>

Great! Thans so very much.

John,

I tried what you said and now I get an error message (attached). What now?

Norm

quote:

Originally posted by JohnZ:
Hi Norm,

Do not connect the TCC application to TheSky when using CCDAP. They will conflict. "No rotator can serve two masters". <g>

PIR.doc (20 KB, 76 downloads)

Hi Norm,

Can you post the entire log file. Just load it as an attachment. Also what firmware level is loaded to your TCC ?

Norm,

Please post the complete log file as an attachment.

(BTW, did you know your Word files are being created with a .doc.dot extension? This implies they are templates and may indicate a virus activity.)

Here is the entire log file on notepad.

No, I was not aware of the Word file problem. It may just be the way I have word set up...I don't use it much and not too familiar with the operation. I use virus scan software (AVG which is updated daily) and there dosen't seem to be a problem.

Thanks again,
Norm

PIR.txt (4 KB, 73 downloads)