I just added a TAKometer rotator to my system and it connects to COM port 5. When I try to setup CCDAutopilot 3 to use this rotator and select TAKometer from the pull-down menu, the COM port is greyed out on COM port 1 and will not let me change it to COM 5. Any suggestions.

Hi Denny,

You only need to set the com port when using a Pyxis Rotator. CCDAP3 knows which com port the Takometer is connected to based on the Takometer control program (which should be running before you try and connect with CCDAP3). HTH ....

Thanks Frank,

It works now.