CCDAP4 stopped with a net framework crash message.

Could not save last image in Log.

What's up here?

Max

ccdap20080924_204938.log (33 Kb, 24 downloads)

My crystal ball is a bit hazy, Max Not too much to go on. What was the .NET error message? Is it repeatable? If so, please capture it and let me take a look. Was it related to the inability to save the file at the end of the log? Did you have Microsoft's Automatic Update disabled? (You should.) Is there sufficient disk space? Where there any other disk activities (backup, archiving, etc.) underway at this time? (They shouldn't be.)

I new I should of wrote that down.

I turned auto updates off a while back

Disk has 38 GB free.

I will let you more if it happens again.

BTW, I had trouble with the G2V RGB measurement
. It never changed the filter from green.
MaxIM 4.0 did not relfect the CFW changing either. I tried this several times

Max

I ran the RGB ratio, along with an extended Maxim imaging run last night without incident.

It might be worthwhile taking a look at the introductory videos on the CCDAP product page: http://www.ccdware.com/products/ccdap4/ Click on the "CLICK HERE FOR DEMO" box on the CCDAutoPilot4 graphic.

I test the utility again.
Still indicated only green filter both in the text in lower right and in MaxIM Dls filter box.

Did you try this in MaxIm 5.0?

Sure did. Works fine with v5.01.