Hi Paul,

FWHM 2.15 works for a significant period of time (say 10 min of a 15 min subexposure) and then quits, prompting a Windows report window to open asking (unhelpfully) if this should be reported to MicroSoft. I am using CCDSoft 5.00.192, and am running autoguiding exposures at 3 s. Other software includes TheSky 6 (current version), RCOS TCC 1.5.26, CCDAP4 (current version). Never saw this with the previous version. Just curious about your thoughts. I just keep restarting it and it works again for a while. I've gotten used to having it running so that I can interrogate conditions during an image acquisition (at least while I'm up).

Thank you and love the program,

Bill Perkins

Hi Bill,

I'm working on this issue, as there were a couple of similar reports. Can you please try an older version of FWHM monitor and see if the problem goes away? You can download the 2.1.0 version of FWHM monitor program from here:

http://pk.darkhorizons.org/CCDI/CFWHM210.exe

Place it in the C:\Program Files\CCDWare\CCDInspector2 folder, and double-click on CFWHM210.exe to run it.

Please let me know if the problem goes away.

Regards,

-Paul

Hi Paul,

Thank you. Will do. May take a few days due to clouds/snow.

Bill Perkins

Hi Paul,

FWHM version 2.06 is working just fine. Hope this helps.

Bill Perkins

Thank you, Bill! This gives me a very good idea as to where to look for the problem in 2.1.5. I'll post an update as soon as it's fixed.

Regards,

-Paul

FWHM 2.16 appears to have resolved the issue. Thanks again for the great support and for the great app.

Bill Perkins