After I calculate the Peak to Peak and Max allowable movement for my system what should I set my guider correction aggressivness to? I have an AP1200 mount with PemPro corrected PEC -- it is highly polar aligned on a permenant observatory. Normally I set the aggressivenss to 4-5, but that was with the default min and max guider setting.

Thanks,
Tom

Hi Tom,

If you set your min and max move according to the autoguide calculator, I recommend setting your aggressiveness to 8-10. I use 8 with good results.

I suggest an agressiveness setting of 8 with using the calculator.

rb