20:52:05 Setup Information
20:52:05 Equipment Settings
Observer: J Parkes
Observatory: Nighthawk
Telescope: TOA 130
Mount type: Equatorial
External guide scope used for guiding
Imaging camera: ST 8XME
Imager pixel size: 9.00
Telescope focal length: 999
   Imager image scale: 1.858
Imaging camera gain: 2.69000005722046

Guide camera pixel size: 7.40
Guide focal length: 999
   Guider image scale: 1.53
Guide rate: 0.50
Guider1: 1x16.5280.9
Guider2: -5.1-4.9WRot: 00
-156.5
Mount settling time: 3 sec.
1x1 download time: 24 sec.
2x2 download time: 12 sec.
3x3 download time: 8 sec.
Other delays: 1 sec.

Software Settings
CCDAutoPilot, Version: 3.42.7, Professional Edition
Licensed to: joel.parkes@utoronto.ca
System profile: C:\Documents and Settings\Joel\My Documents\CCDWare\CCDAutoPilot3\System Profiles\TOA 03 19 09.app
Operating System: Microsoft Windows NT 5.1.2600 Service Pack 3
MaxIm version 5, 4, 0, 0 being used for image acquisition.
Maxim camera: SBIG Universal
TheSky version 6.0.0.53 being used for telescope control.
FocusMax version 3.04.0019 being used for focus control.
PinPoint version 5.0.13 used for plate solving
   Catalog: GSC ACT
   Catalog Path: C:\Program Files\PinPoint\GSC11\
   Catalog Expansion: .5
   Plate solve sub-frame: Full
   Plate solve filter: Green
   Plate solve binning: 2x2
   Plate solve exposure time: 5
SBIG standard FITS keywords will be inserted into the FITS header.
WARNING: Application revision checking disabled.  CCDAutoPilot may not run properly.

Tracking and Guiding Settings
WARNING: No slew or rotate to first target.
   Telescope slew to an altitude below 5 will be prevented.
   Guided operation being used with a peak enhanced dither of 1.00 pixels.
   AGSR enabled for 20 cycles to get within 1 pixels.

Focus Settings
   FocusMax is using the RoboFocusServer.Focuser focuser driver
WARNING: No focusing method is specified.
   Focuser temperature compensation is not enabled.
   A post-focus offset of 0 counts will be applied.
WARNING: No periodic focusing specified.

Filter Parameters
Filter		Offset	Focus Exposure
Clear		0		1.0
CIR		0		1.0
Red		0		1.0
Green		0		1.0
Blue		0		1.0
Ha 6nm		0		1.0
OIII		0		1.0
SII		0		1.0
Ha 12nm		0		1.0
none		0		1.0

Meridian Flip Settings
   Automatic meridian crossing enabled.
   The mount will not be resynchronized after the meridian crossing.
   WARNING: The guide star must be manually selected after meridian crossing.
   A focus run will not occur after the meridian crossing.
   The mount will track for 1 minutes past the meridian before flipping.
   The rotator will not rotate upon meridian crossing.


Session and Options
1. Startup Tasks

Light frames for the specified target(s) will be obtained.
   Slew to first target will be skipped

2. After Light Frames

3. Shutdown tasks

20:52:05 
20:52:05 
20:52:05 WARNING: Application revision checking disabled.  CCDAutoPilot may not run properly.
20:52:05 
20:52:05 Run starting...
20:52:05 Log saved to: C:\CCD Images\Nighthawk 2009\Mar 2009\03 19 09\CCDAP\Merdian 1\CCDAutoPilot_Logs\ccdap20090319_205205.log
20:52:05 *** Review setup before starting session ***
20:52:05 
20:52:05 Root save path: C:\CCD Images\Nighthawk 2009\Mar 2009\03 19 09\CCDAP\Merdian 1\
20:52:05 System profile: C:\Documents and Settings\Joel\My Documents\CCDWare\CCDAutoPilot3\System Profiles\TOA 03 19 09.app
20:52:05 Target List: 
20:52:05 Start sequence number: 1
20:52:05 
20:52:05 
20:52:05 WARNING: Application revision checking disabled.  CCDAutoPilot may not run properly.
20:52:05 
20:52:05 
20:52:05 Light Frames
20:52:05 Telescope connected (0)
20:52:07 Telescope tracking on
20:52:07 Target: GSC 1356:348 at RA: 07 00 15.2, Dec: +20 48 44 , PA: 281.1
20:52:07   Rise: 13:03 19 Mar
20:52:07   45° E elevation: 17:25 19 Mar
20:52:07   Transit: 20:31 19 Mar
20:52:07   45° W elevation: 23:38 19 Mar
20:52:07   Set: 03:59 20 Mar
20:52:07 Telescope currently pointing to...
20:52:07 Telescope RA: 07 00 49.3, Dec: +20 47 52 
20:52:07 Plate solving...
20:52:07 Telescope RA: 07 00 49.3, Dec: +20 47 52 
20:52:23 C:\CCD Images\Nighthawk 2009\Mar 2009\03 19 09\CCDAP\Merdian 1\CCDAutoPilot_SyncImages\SyncImage_GSC 1356 348_205223.fit
20:52:25 Solved RA: 07 00 22.6, Dec: +20 33 55 PA: 100.6
20:52:25 Target RA: 07 00 22.6, Dec: +20 33 55 , PA: 100.6
20:52:25 Target is already passed the meridian
20:52:25 Light set 1 of 1 starting...
20:52:25 Light Series 1: 10 light frame(s), binned 1x1, Ha 6nm filter, 60 seconds.
20:52:25 Guide exposure is 5 sec.
20:52:26 Telescope RA: 07 00 49.3, Dec: +20 47 51 
20:52:26 Telescope RA: 07 00 49.3, Dec: +20 47 51 
20:52:26 Getting guide star location...
20:52:46 Guider running
20:52:46 Guider x: 194.0, y: 457.0
20:52:47 Guider stopped.
20:52:47 Dither: +0.0, +0.0, 
20:53:02 Guider running
20:53:11 Guide Error X: 0.0, Y: 0.0
20:53:11 Altitude: 65 deg.
20:53:11 Exposing...
20:54:59 Guider stopped.
20:54:59 Run aborted.