09:49:19 Setup Information
09:49:20 Equipment Settings
Observer: Richard Seavey
Observatory: 
Telescope: CDK 12.5
Mount type: Equatorial
Self guider or off-axis guider used for guiding
Imaging camera: STL-11k, Astrodon Filters
Imager pixel size: 9.00
Telescope focal length: 2558
   Imager image scale: 0.726
Imaging camera gain: 1.57999992370605

Guide camera pixel size: 7.40
Guide focal length: 2558
   Guider image scale: 0.60
Guide rate: 1.00
Guider1: 2x0.0356.4
Guider2: -13.4-12.6ERot: 356
4.0
Rotator offset: 0.4 E
Mount settling time: 5 sec.
1x1 download time: 30 sec.
2x2 download time: 10 sec.
3x3 download time: 5 sec.
Other delays: 50 sec.

Software Settings
CCDAutoPilot, Version: 3.42.7, Standard Edition
Licensed to: reseavey@rcn.com
System profile: C:\Program Files\CCDWare\CCDAutoPilot3\System Profiles\CDK_12.5_6_11_08.app
Operating System: Microsoft Windows NT 5.1.2600 Service Pack 3
MaxIm version 4,62,1,0 being used for image acquisition.
Maxim camera: SBIG Universal
No telescope control program used.
Rotator used: Optec Pyxis on COM5
PinPoint version 5.0.13 used for plate solving
   Catalog: GSC ACT
   Catalog Path: D:\GSC for Pinpoint\
   Catalog Expansion: .3
   Plate solve sub-frame: Full
   Plate solve filter: Lum
   Plate solve binning: 2x2
   Plate solve exposure time: 10
Standard FITS keywords will be inserted into the FITS header.

Tracking and Guiding Settings
   Telescope slew to an altitude below 15 will be prevented.
   Guided operation being used with a peak enhanced dither of 3 pixels.
   AGSR enabled for 20 cycles to get within 1 pixels.
   An audible alarm will sound if the guide star is not recovered.

Focus Settings
WARNING: no automatic focusing is possible without a focuser connected via a focus control program.
   Focusing will be performed every 30 minutes.


Meridian Flip Settings
   Automatic meridian crossing enabled.
   The mount will not be resynchronized after the meridian crossing.
   The guide star will be automatically selected after meridian crossing.
   A focus run will not occur after the meridian crossing.
   The mount will track for 12 minutes past the meridian before flipping.
   The rotator will rotate 180 degrees upon meridian crossing.


Session and Options
1. Startup Tasks

2. After Light Frames

Dark and/or bias frames will be acquired after the target light frames.
   Any light frames or dark/bias frame exposures will be aborted at dawn approaches.

3. Shutdown tasks
   Telescope will be re-parked after dawn flats are completed.

09:49:20 
09:49:20 Run starting...
09:49:20 Log saved to: G:\06_13_08\CCDAutoPilot_Logs\ccdap20080614_094919.log
09:49:20 *** Review setup before starting session ***
09:49:20 
09:49:20 Root save path: G:\06_13_08\
09:49:20 System profile: C:\Program Files\CCDWare\CCDAutoPilot3\System Profiles\CDK_12.5_6_11_08.app
09:49:20 Target List: C:\Program Files\CCDWare\CCDAutoPilot3\Target Lists\M27 CDK.xml
09:49:20 Start sequence number: 3775
09:49:20 
09:49:20 
09:49:20 Dark/Bias Frames
09:49:20 Dark set 1 of 1 starting...
09:49:20 Dark/Bias Series 5: 1 dark frame(s), binned 2x2, Ha filter, 2 seconds.
09:49:21 Exposing...
09:49:36 G:\06_13_08\080614_CalibrationFrames\25Dark2s2x2_080614_03775.fit
09:49:38 
09:49:38 Total light exposure time is 0 hours, 0.0 minutes
09:49:38 Total dark exposure time is 0 hours, 1.0 minutes
09:49:39 Run completed.