20:02:07 Setup Information 20:02:08 Equipment Settings Observer: Kent Wood Observatory: Starlodge Observatory Telescope: CDK 12.5 Mount type: Equatorial Self guider or off-axis guider used for guiding Imaging camera: STL 11000 Imager pixel size: 9.00 Telescope focal length: 2541 Imager image scale: 0.735 Imaging camera gain: 1.79999995231628 Guide camera pixel size: 7.40 Guide focal length: 2541 Guider image scale: 0.60 Guide rate: 0.50 Guider1: 2x0.0264.4 Guider2: -6.36.2ERot: 355 94.4 Rotator offset: -90.6 E Mount settling time: 3 sec. 1x1 download time: 24 sec. 2x2 download time: 12 sec. 3x3 download time: 8 sec. Other delays: 1 sec. Software Settings CCDAutoPilot, Version: 3.42.7, Professional Edition Licensed to: kvwood@earthlink.net System profile: C:\Documents and Settings\Valued KSI Client\My Documents\CCDWare\CCDAutoPilot3\System Profiles\CDK 12.5 with internal guiding.app Operating System: Microsoft Windows NT 5.1.2600 Service Pack 2 MaxIm version 4,61,1,0 being used for image acquisition. Maxim camera: SBIG Universal TheSky version 6.0.0.60 being used for telescope control. FocusMax version 3.04.0001 being used for focus control. Rotator used: Optec Pyxis on COM10 Boltwood cloud sensor version II used. PinPoint version 5.0.13 used for plate solving Catalog: GSC ACT Catalog Path: C:\Documents and Settings\Valued KSI Client\My Documents\Star Catalogs\GSC 1.1\ Catalog Expansion: .5 Plate solve sub-frame: Full Plate solve filter: Luminance Plate solve binning: 2x2 Plate solve exposure time: 5 Standard FITS keywords will be inserted into the FITS header. Tracking and Guiding Settings Telescope slew to an altitude below 10 will be prevented. Guided operation being used with a peak enhanced dither of 2.00 pixels. AGSR enabled for 20 cycles to get within 1 pixels. Focus Settings FocusMax is using the OptecTCF.Focuser focuser driver SkyStar being used for focusing. Focus star maximum brightness is Mag. 4 Focus stars will be selected to have an altitude higher than 60 degrees. Focuser temperature compensation is not enabled. A post-focus offset of 0 counts will be applied. WARNING: No periodic focusing specified. WARNING: The same Luminance filter is specified for focusing, regardless of the exposure filter. Filter Parameters Filter Offset Focus Exposure Red 0 0.7 Green 0 0.7 Blue 0 0.7 HII 0 0.7 Luminance 0 0.7 Meridian Flip Settings Automatic meridian crossing enabled. The mount will not be resynchronized after the meridian crossing. The guide star will be automatically selected after meridian crossing. A focus run will occur immediately after the meridian crossing. The mount will track for 1 minutes past the meridian before flipping. The rotator will rotate 180 degrees upon meridian crossing. Session and Options 1. Startup Tasks If cloud sensor reports cloudy, the run will immediately abort. Light frames for the specified target(s) will be obtained. Precision slew to target will be used. 2. After Light Frames Telescope will be parked after light frames are completed. Any light frames or dark/bias frame exposures will be aborted at dawn approaches. 3. Shutdown tasks Telescope will be re-parked after dawn flats are completed. Cooler will be turned off. C:\Program Files\Software-y-Ddraig\AstroHaven ClamUp\CloseClamshell.bat will be run. 20:02:08 20:02:08 Run starting... 20:02:08 Log saved to: C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_Logs\ccdap20081021_200207.log 20:02:08 *** Review setup before starting session *** 20:02:08 20:02:08 Root save path: C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\ 20:02:08 System profile: C:\Documents and Settings\Valued KSI Client\My Documents\CCDWare\CCDAutoPilot3\System Profiles\CDK 12.5 with internal guiding.app 20:02:08 Target List: C:\Documents and Settings\Valued KSI Client\My Documents\CCDWare\CCDAutoPilot3\Target Lists\Bubble Nebula.xml 20:02:08 Start sequence number: 367 20:02:08 20:02:08 20:02:08 Light Frames 20:02:08 Telescope connected (0) 20:02:10 Telescope tracking on 20:02:11 Target: Bubble Nebula at RA: 23 20 45.0, Dec: +61 12 42 , PA: 162.0 20:02:11 Rise: n/a 20:02:11 45° E elevation: 18:02 21 Oct 20:02:11 Transit: 22:20 21 Oct 20:02:11 45° W elevation: 02:38 22 Oct 20:02:11 Set: n/a 20:02:12 Slewing scope... 20:02:13 Slewed to RA: 23 21 10.2, Dec: +61 15 54 20:02:13 Mount settling for 3 sec. after slew. 20:02:16 Telescope RA: 23 21 10.3, Dec: +61 15 58 20:02:16 Rotating to PA: 162.0e 20:02:16 Rotator moving to: 253 20:02:17 Plate solving... 20:02:17 Telescope RA: 23 21 10.3, Dec: +61 15 58 20:02:36 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_SyncImages\SyncImage_Bubble Nebula_200235.fit 20:02:38 Solved RA: 23 20 41.9, Dec: +61 13 27 PA: 169.4 20:02:38 Pointing error (arcmin): RA -0.8; Dec 0.8 20:02:38 Slewing scope... 20:02:39 Slewed to RA: 23 21 13.3, Dec: +61 15 09 20:02:39 Mount settling for 3 sec. after slew. 20:02:42 Location corrected 20:02:42 Telescope currently pointing to... 20:02:42 Telescope RA: 23 21 13.4, Dec: +61 15 13 20:02:42 Plate solving... 20:02:42 Telescope RA: 23 21 13.4, Dec: +61 15 13 20:02:59 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_SyncImages\SyncImage_Bubble Nebula_200259.fit 20:03:02 Solved RA: 23 20 44.9, Dec: +61 12 44 PA: 169.4 20:03:02 Target RA: 23 20 44.9, Dec: +61 12 44 , PA: 169.4 20:03:02 Meridian crossing after 22:21 Tue 21 Oct 20:03:02 Light set 1 of 3 starting... 20:03:02 Light Series 1: 3 light frame(s), binned 1x1, Luminance filter, 600 seconds, focus at series start 20:03:02 Guide exposure is 8 sec. 20:03:02 Each exposure start will be delayed by 40 sec. 20:03:03 Telescope RA: 23 21 13.4, Dec: +61 15 13 20:03:05 Focusing using Luminance filter... 20:03:06 Telescope RA: 23 21 13.3, Dec: +61 15 13 20:03:06 Telescope RA: 23 21 13.3, Dec: +61 15 13 20:03:09 Moving to focus star number 1, SAO 34921 at 62 deg. altitude 20:03:09 Slewing scope... 20:03:14 Slewed to RA: 22 53 26.5, Dec: +60 09 11 20:03:14 Mount settling for 3 sec. after slew. 20:04:31 Focus position: 4974, HFD: 2.8 arc-sec., Temp.: 16.8 20:04:33 Returning to target... 20:04:33 Slewing scope... 20:04:38 Slewed to RA: 23 21 10.1, Dec: +61 15 56 20:04:38 Mount settling for 3 sec. after slew. 20:04:41 Plate solving... 20:04:41 Telescope RA: 23 21 10.2, Dec: +61 15 60 20:04:58 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_SyncImages\SyncImage_Bubble Nebula_200458.fit 20:05:00 Solved RA: 23 20 40.7, Dec: +61 13 31 PA: 169.4 20:05:00 Pointing error (arcmin): RA -1.1; Dec 0.8 20:05:00 Slewing scope... 20:05:02 Slewed to RA: 23 21 14.4, Dec: +61 15 08 20:05:02 Mount settling for 3 sec. after slew. 20:05:05 Location corrected 20:05:06 Done focusing 20:05:08 Telescope RA: 23 21 14.5, Dec: +61 15 13 20:05:09 Guide1: 265.0-3.0, 5.9-170.5 20:05:09 Getting guide star location... 20:05:44 Guider running 20:05:44 Guider x: 301.7, y: 22.6 20:05:45 Guider stopped. 20:05:45 Dither: +0.0, +0.0, 20:06:03 Guider running 20:06:17 Guide Error X: 1.5, Y: 0.7 20:06:32 Guide Error X: 0.8, Y: 0.5 20:06:32 Altitude: 59 deg. 20:07:11 Exposing... 20:18:10 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Luminance162E_Bubble Nebula_00367.fit 20:18:14 Guider stopped. 20:18:14 Dither: +2.0, +0.0, 20:18:32 Guider running 20:18:46 Guide Error X: 3.3, Y: 0.4 20:19:00 Guide Error X: 2.1, Y: 0.8 20:19:15 Guide Error X: 1.4, Y: 0.5 20:19:29 Guide Error X: 0.3, Y: 0.2 20:19:29 Altitude: 60 deg. 20:20:09 Exposing... 20:31:05 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Luminance162E_Bubble Nebula_00368.fit 20:31:09 Guider stopped. 20:31:09 Dither: -2.0, +0.0, 20:31:27 Guider running 20:31:41 Guide Error X: 2.7, Y: 0.4 20:31:55 Guide Error X: 0.9, Y: 0.3 20:31:55 Altitude: 62 deg. 20:32:35 Exposing... 20:43:34 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Luminance162E_Bubble Nebula_00369.fit 20:43:37 Guider stopped. 20:43:37 *** Average altitude for this series is 61 deg. 20:43:37 Light Series 2: 3 light frame(s), binned 1x1, Red filter, 600 seconds, focus at series start. 20:43:37 Guide exposure is 20 sec. 20:43:37 Each exposure start will be delayed by 100 sec. 20:43:38 Telescope RA: 23 21 13.9, Dec: +61 14 60 20:43:38 Focusing using Luminance filter... 20:43:39 Telescope RA: 23 21 13.8, Dec: +61 15 00 20:43:39 Telescope RA: 23 21 13.8, Dec: +61 15 00 20:43:41 Moving to focus star number 1, SAO 20567 at 62 deg. altitude 20:43:41 Slewing scope... 20:43:43 Slewed to RA: 23 20 39.4, Dec: +62 01 24 20:43:43 Mount settling for 3 sec. after slew. 20:45:10 Focus position: 4940, HFD: 2.9 arc-sec., Temp.: 16.9 20:45:12 Returning to target... 20:45:12 Slewing scope... 20:45:13 Slewed to RA: 23 21 10.1, Dec: +61 15 56 20:45:13 Mount settling for 3 sec. after slew. 20:45:16 Plate solving... 20:45:16 Telescope RA: 23 21 10.2, Dec: +61 15 60 20:45:33 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_SyncImages\SyncImage_Bubble Nebula_204533.fit 20:45:36 Solved RA: 23 20 41.9, Dec: +61 13 47 PA: 169.5 20:45:36 Pointing error (arcmin): RA -0.8; Dec 1.1 20:45:36 Slewing scope... 20:45:37 Slewed to RA: 23 21 13.2, Dec: +61 14 52 20:45:37 Mount settling for 3 sec. after slew. 20:45:40 Location corrected 20:45:41 Done focusing 20:45:41 Getting guide star location... 20:46:33 Guider running 20:46:33 Guider x: 302.6, y: 23.9 20:46:33 Guider stopped. 20:46:33 Dither: +0.0, +0.0, 20:47:03 Guider running 20:47:35 Guide Error X: 0.2, Y: 0.4 20:47:35 Altitude: 63 deg. 20:49:15 Exposing... 21:00:18 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Red162E_Bubble Nebula_00370.fit 21:00:22 Guider stopped. 21:00:22 Dither: +2.0, +0.0, 21:00:52 Guider running 21:01:24 Guide Error X: 3.2, Y: 0.5 21:01:57 Guide Error X: 1.5, Y: 0.7 21:02:29 Guide Error X: 0.6, Y: 0.5 21:02:29 Altitude: 64 deg. 21:04:09 Exposing... 21:15:10 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Red162E_Bubble Nebula_00371.fit 21:15:15 Guider stopped. 21:15:15 Dither: -2.0, +0.0, 21:15:45 Guider running 21:16:16 Guide Error X: 3.1, Y: 0.4 21:16:49 Guide Error X: 1.8, Y: 0.5 21:17:21 Guide Error X: 2.2, Y: 0.2 21:17:54 Guide Error X: 1.4, Y: 0.0 21:18:26 Guide Error X: 0.9, Y: 0.3 21:18:26 Altitude: 65 deg. 21:20:06 Exposing... 21:31:06 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Red162E_Bubble Nebula_00372.fit 21:31:09 Guider stopped. 21:31:09 *** Average altitude for this series is 64 deg. 21:31:09 Light Series 3: 3 light frame(s), binned 1x1, Blue filter, 600 seconds, focus at series start. 21:31:09 Guide exposure is 20 sec. 21:31:09 Each exposure start will be delayed by 100 sec. 21:31:10 Telescope RA: 23 21 12.2, Dec: +61 14 45 21:31:11 Focusing using Luminance filter... 21:31:11 Telescope RA: 23 21 12.2, Dec: +61 14 45 21:31:11 Telescope RA: 23 21 12.2, Dec: +61 14 45 21:31:13 Moving to focus star number 1, SAO 20531 at 65 deg. altitude 21:31:13 Slewing scope... 21:31:16 Slewed to RA: 23 16 51.7, Dec: +62 00 58 21:31:16 Mount settling for 3 sec. after slew. 21:32:37 Focus position: 4943, HFD: 2.9 arc-sec., Temp.: 15.4 21:32:38 Returning to target... 21:32:38 Slewing scope... 21:32:41 Slewed to RA: 23 21 10.1, Dec: +61 15 56 21:32:41 Mount settling for 3 sec. after slew. 21:32:44 Plate solving... 21:32:44 Telescope RA: 23 21 10.1, Dec: +61 15 59 21:33:01 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_SyncImages\SyncImage_Bubble Nebula_213301.fit 21:33:03 Solved RA: 23 20 43.3, Dec: +61 13 60 PA: 169.5 21:33:03 Pointing error (arcmin): RA -0.4; Dec 1.3 21:33:03 Slewing scope... 21:33:04 Slewed to RA: 23 21 11.8, Dec: +61 14 39 21:33:04 Mount settling for 3 sec. after slew. 21:33:07 Location corrected 21:33:08 Done focusing 21:33:08 Getting guide star location... 21:33:39 Guider running 21:33:39 Guider x: 302.5, y: 23.4 21:33:39 Guider stopped. 21:33:40 Dither: +0.0, +0.0, 21:34:09 Guider running 21:34:41 Guide Error X: 0.4, Y: 0.1 21:34:41 Altitude: 66 deg. 21:36:21 Exposing... 21:47:24 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Blue162E_Bubble Nebula_00373.fit 21:47:28 Guider stopped. 21:47:28 Dither: +2.0, +0.0, 21:47:58 Guider running 21:48:30 Guide Error X: 1.6, Y: 0.3 21:49:03 Guide Error X: 1.7, Y: 0.2 21:49:35 Guide Error X: 0.6, Y: 0.2 21:49:35 Altitude: 67 deg. 21:51:15 Exposing... 22:02:16 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Blue162E_Bubble Nebula_00374.fit 22:02:20 Guider stopped. 22:02:20 Dither: -2.0, +0.0, 22:02:50 Guider running 22:03:22 Guide Error X: 3.2, Y: 0.3 22:03:54 Guide Error X: 1.4, Y: 0.3 22:04:27 Guide Error X: 0.2, Y: 0.3 22:04:27 Altitude: 67 deg. 22:06:06 Exposing... 22:17:08 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Blue162E_Bubble Nebula_00375.fit 22:17:10 Guider stopped. 22:17:10 *** Average altitude for this series is 67 deg. 22:17:10 Light Series 4: 3 light frame(s), binned 1x1, Green filter, 600 seconds, focus at series start. 22:17:10 Guide exposure is 20 sec. 22:17:10 Each exposure start will be delayed by 100 sec. 22:17:11 Telescope RA: 23 21 09.1, Dec: +61 14 30 22:17:12 Waiting for meridian flip time... 22:22:10 Meridian flip starting... 22:24:29 Rotator moving to: 73.0 22:24:29 Slewing scope... 22:25:25 Slewed to RA: 23 21 10.1, Dec: +61 15 56 22:25:25 Mount settling for 3 sec. after slew. 22:25:28 Rotator movement to 73.0 complete 22:25:29 Rotator position: 73.0 22:25:29 Adjusting PM pointing location... 22:25:29 Plate solving... 22:25:29 Telescope RA: 23 21 09.8, Dec: +61 15 58 22:25:52 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_SyncImages\SyncImage_Bubble Nebula_222552.fit 22:25:55 Solved RA: 23 20 41.7, Dec: +61 12 22 PA: 169.5 22:25:55 Pointing error (arcmin): RA -0.8; Dec -0.4 22:25:55 Slewing scope... 22:25:57 Slewed to RA: 23 21 13.4, Dec: +61 16 17 22:25:57 Mount settling for 3 sec. after slew. 22:26:00 PM pointing adjustment complete. 22:26:01 Meridian Flip completed. 22:26:01 Focusing using Luminance filter... 22:26:02 Telescope RA: 23 21 13.2, Dec: +61 16 19 22:26:02 Telescope RA: 23 21 13.2, Dec: +61 16 19 22:26:04 Moving to focus star number 1, SAO 20614 at 66 deg. altitude 22:26:04 Slewing scope... 22:26:06 Slewed to RA: 23 25 15.8, Dec: +62 20 10 22:26:06 Mount settling for 3 sec. after slew. 22:27:30 Focus position: 5005, HFD: 3.7 arc-sec., Temp.: 13.3 22:27:32 Returning to target... 22:27:32 Slewing scope... 22:27:34 Slewed to RA: 23 21 10.1, Dec: +61 15 56 22:27:34 Mount settling for 3 sec. after slew. 22:27:37 Plate solving... 22:27:37 Telescope RA: 23 21 10.0, Dec: +61 15 58 22:27:54 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_SyncImages\SyncImage_Bubble Nebula_222754.fit 22:27:56 Solved RA: 23 20 42.0, Dec: +61 12 55 PA: 169.6 22:27:56 Pointing error (arcmin): RA -0.7; Dec 0.2 22:27:57 Slewing scope... 22:27:58 Slewed to RA: 23 21 13.1, Dec: +61 15 45 22:27:58 Mount settling for 3 sec. after slew. 22:28:01 Location corrected 22:28:02 Done focusing 22:28:02 Telescope RA: 23 21 12.9, Dec: +61 15 47 22:28:02 Getting guide star location... 22:28:34 Guider running 22:28:34 Guider x: 303.5, y: 22.7 22:28:34 Guider stopped. 22:28:34 Dither: +0.0, +0.0, 22:29:04 Guider running 22:29:36 Guide Error X: 0.4, Y: 2.2 22:30:08 Guide Error X: 0.1, Y: 0.2 22:30:08 Altitude: 67 deg. 22:31:48 Exposing... 22:43:01 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Green162W_Bubble Nebula_00376.fit 22:43:06 Guider stopped. 22:43:06 Dither: +2.0, +0.0, 22:43:36 Guider running 22:44:07 Guide Error X: 1.7, Y: 0.7 22:44:40 Guide Error X: 1.7, Y: 0.4 22:45:12 Guide Error X: 1.8, Y: 0.0 22:45:45 Guide Error X: 0.2, Y: 0.2 22:45:45 Altitude: 67 deg. 22:47:24 Exposing... 22:58:36 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Green162W_Bubble Nebula_00377.fit 22:58:40 Guider stopped. 22:58:40 Dither: -2.0, +0.0, 22:59:10 Guider running 22:59:42 Guide Error X: 3.1, Y: 0.2 23:00:14 Guide Error X: 1.0, Y: 0.4 23:00:47 Guide Error X: 0.4, Y: 0.2 23:00:47 Altitude: 66 deg. 23:02:26 Exposing... 23:13:27 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Green162W_Bubble Nebula_00378.fit 23:13:30 Guider stopped. 23:13:30 *** Average altitude for this series is 67 deg. 23:13:30 Light set 2 of 3 starting... 23:13:30 Light Series 1: 3 light frame(s), binned 1x1, Luminance filter, 600 seconds, focus at series start 23:13:30 Guide exposure is 8 sec. 23:13:30 Each exposure start will be delayed by 40 sec. 23:13:31 Telescope RA: 23 21 11.2, Dec: +61 15 43 23:13:32 Focusing using Luminance filter... 23:13:32 Telescope RA: 23 21 11.1, Dec: +61 15 43 23:13:32 Telescope RA: 23 21 11.1, Dec: +61 15 43 23:13:35 Moving to focus star number 1, SAO 20614 at 65 deg. altitude 23:13:35 Slewing scope... 23:13:37 Slewed to RA: 23 25 15.8, Dec: +62 20 10 23:13:37 Mount settling for 3 sec. after slew. 23:14:48 Focus position: 4949, HFD: 4.4 arc-sec., Temp.: 13.9 23:14:50 Returning to target... 23:14:50 Slewing scope... 23:14:52 Slewed to RA: 23 21 10.1, Dec: +61 15 56 23:14:52 Mount settling for 3 sec. after slew. 23:14:55 Plate solving... 23:14:55 Telescope RA: 23 21 10.0, Dec: +61 15 58 23:15:12 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\CCDAutoPilot_SyncImages\SyncImage_Bubble Nebula_231512.fit 23:15:14 Solved RA: 23 20 44.3, Dec: +61 13 01 PA: 169.5 23:15:14 Pointing error (arcmin): RA -0.2; Dec 0.3 23:15:14 Slewing scope... 23:15:16 Slewed to RA: 23 21 10.7, Dec: +61 15 39 23:15:16 Mount settling for 3 sec. after slew. 23:15:19 Location corrected 23:15:21 Done focusing 23:15:22 Getting guide star location... 23:15:50 Guider running 23:15:50 Guider x: 304.2, y: 23.1 23:15:50 Guider stopped. 23:15:50 Dither: +0.0, +0.0, 23:16:08 Guider running 23:16:22 Guide Error X: 0.2, Y: 0.3 23:16:22 Altitude: 66 deg. 23:17:01 Exposing... 23:27:57 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Luminance162W_Bubble Nebula_00379.fit 23:28:01 Guider stopped. 23:28:01 Dither: +2.0, +0.0, 23:28:19 Guider running 23:28:33 Guide Error X: 1.9, Y: 0.2 23:28:47 Guide Error X: 1.0, Y: 0.3 23:29:02 Guide Error X: 0.2, Y: 0.1 23:29:02 Altitude: 65 deg. 23:29:41 Exposing... 23:40:34 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Luminance162W_Bubble Nebula_00380.fit 23:40:38 Guider stopped. 23:40:38 Dither: -2.0, +0.0, 23:40:56 Guider running 23:41:10 Guide Error X: 4.7, Y: 0.2 23:41:25 Guide Error X: 2.5, Y: 0.8 23:41:39 Guide Error X: 3.0, Y: 0.2 23:41:54 Guide Error X: 1.4, Y: 0.0 23:42:08 Guide Error X: 0.8, Y: 0.3 23:42:08 Altitude: 64 deg. 23:42:48 Exposing... 23:53:47 C:\Documents and Settings\Valued KSI Client\My Documents\My Pictures\CCD\081021_Bubble Nebula\Luminance162W_Bubble Nebula_00381.fit 23:53:50 Guider stopped. 23:53:50 *** Average altitude for this series is 64 deg. 23:53:50 Light Series 2: 3 light frame(s), binned 1x1, Red filter, 600 seconds, focus at series start. 23:53:50 Guide exposure is 20 sec. 23:53:50 Each exposure start will be delayed by 100 sec. 23:53:51 Telescope RA: 23 21 10.3, Dec: +61 15 41 23:53:52 Focusing using Luminance filter... 23:53:52 Telescope RA: 23 21 10.2, Dec: +61 15 41 23:53:52 Telescope RA: 23 21 10.2, Dec: +61 15 41 23:53:54 Moving to focus star number 1, SAO 20614 at 62 deg. altitude 23:53:54 Slewing scope... 23:53:57 Slewed to RA: 23 25 15.8, Dec: +62 20 10 23:53:57 Mount settling for 3 sec. after slew. 00:08:59 FocusMax failed to focus after 5 min. 09:12:35 CM1: Microsoft.VisualBasic: Object reference not set to an instance of an object. CM1: Microsoft.VisualBasic: Object reference not set to an instance of an object.